Cedar Garden Gate and Fence Sections
Cedar rough sawn 5 and 6 Foot wide fence sections, 6 foot long section to meet the metal fence.
Note: Fence gate sections need two 4"x4"x 10 foot long cemented posts. Or the gate wont stay stable.
Each post needs to be set into concrete at least 3 feet deep. The outer section also needs a 4"x4"x 10 foot long post set into concrete. Gate can be set in between the two points where the walk way is or will be.
This is done on location. Another 4x4 Post is set and anchored to the house.
Total Cemented holes eight (8).
Total Linear feet 17to 18
Two gates and hardware locking on the inside
Total cost CEDAR $1,986.00
Total cost PINE $1,686.00