We build, deliver and install custom Hydroponic Gardens in IL, WI and IN. Lead time = 2 to 3 weeks. About $5-7 per plant!The hydroponic system is that one clever way to grow plants on a small area surface with not that much effort. In the project featured on this webpage you can see how a homemade vertical A-frame hydroponic system can surely help you growing your garden plants.
Actually, the hydroponic system is one great method for growing herbs or other small plants, like radishes, lettuces or strawberries. Imagine not having to stand on your knees and on the ground, but just pick them while standing up. CLICK HERE TO ORDER YOUR SUPPLIES |
|
4" Pipe System 6x6x3 - 192 Plants on Each Hydro Farm
3x6x6 HYDRO A-FRAME GARDEN 192 PLANTS 4 inch pipe
TRUCK SHIP BY BUYER 220 Pounds Each = $240 to $290 Shipping
150 pounds shipping = $167.00
Lumber non-combustible building material for weather protected applications.
Each piece stamped Underwriters Laboratories, Inc. stamp indicating that the product has code recognized classifications for surface burning characteristics
4" Diameter PVC Schedule 40 Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools, outdoor applications and cold water supply lines.
ASTM D 1784 ASTM D 1785 ASTM D 2665 FHA UM 79a FEDERAL SPECIFICATION L-P-320a\nNSF STANDARD 14 AND 68
All supply and drainage fittings will be compression type (1/4 PE) tube and their associated fittings. Water level can be controlled by adjusting the height inside each tube.
150 pounds shipping = $167.00
Lumber non-combustible building material for weather protected applications.
Each piece stamped Underwriters Laboratories, Inc. stamp indicating that the product has code recognized classifications for surface burning characteristics
4" Diameter PVC Schedule 40 Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools, outdoor applications and cold water supply lines.
ASTM D 1784 ASTM D 1785 ASTM D 2665 FHA UM 79a FEDERAL SPECIFICATION L-P-320a\nNSF STANDARD 14 AND 68
All supply and drainage fittings will be compression type (1/4 PE) tube and their associated fittings. Water level can be controlled by adjusting the height inside each tube.
R.L. Special Project:
A few questions:
1. Is it possible to have the systems be built 8' by 6', rather than 10' by 6'?
- Yes! We can make these to any size.
-We are looking for a footprint of 3' wide by 8' long by 6' tall.
2. Can you please confirm what is the width?
- Whatever your constraints are, we can design them to fit.
-See above, we are looking for a width of 3'.
3. What is the pipe size input into the system? The pipes coming from my pumps at 1.5", so I need to know if I need adapters to connect this system.
- We can match your 1.5”
-Also note, the outlet from the systems needs to connect to a 3" pipe.
-Great
4. How high is the bottom NFT pipe from the base?
- What would you want. These are made to order.
-We need a minimum height of 14" off the ground for the first pipe. A total of 8 vertical levels are proposed (8’ long 4” diameter pipes) on each side; with each level 8” apart vertically. There will be 12 holes in each 8’ pipe to grow 12 plants, which allows 96 plants on each side. Therefore, there will be a total of 192 plants on one standard A-frame.
5. Are you able to provide a quote for the four A-frames?
- Yes.
The entire greenhouse and all systems will be assembles by a general contractor, so it is easiest if I give them the received quote and they follow up with you for ordering the A-frames.
- OK. We can ship with some assembly required.
- Shipping should would be truck.
1. Is it possible to have the systems be built 8' by 6', rather than 10' by 6'?
- Yes! We can make these to any size.
-We are looking for a footprint of 3' wide by 8' long by 6' tall.
2. Can you please confirm what is the width?
- Whatever your constraints are, we can design them to fit.
-See above, we are looking for a width of 3'.
3. What is the pipe size input into the system? The pipes coming from my pumps at 1.5", so I need to know if I need adapters to connect this system.
- We can match your 1.5”
-Also note, the outlet from the systems needs to connect to a 3" pipe.
-Great
4. How high is the bottom NFT pipe from the base?
- What would you want. These are made to order.
-We need a minimum height of 14" off the ground for the first pipe. A total of 8 vertical levels are proposed (8’ long 4” diameter pipes) on each side; with each level 8” apart vertically. There will be 12 holes in each 8’ pipe to grow 12 plants, which allows 96 plants on each side. Therefore, there will be a total of 192 plants on one standard A-frame.
5. Are you able to provide a quote for the four A-frames?
- Yes.
The entire greenhouse and all systems will be assembles by a general contractor, so it is easiest if I give them the received quote and they follow up with you for ordering the A-frames.
- OK. We can ship with some assembly required.
- Shipping should would be truck.
4 INCH PIPE 3x5x8 HYDRO A-FRAME GARDEN 196 PLANTSTRUCK SHIP BY BUYER 220 Pounds Each = $240 to $290 Shipping
Lumber non-combustible building material for weather protected applications. Each piece stamped Underwriters Laboratories, Inc. stamp indicating that the product has code recognized classifications for surface burning characteristics 4" Diameter PVC Schedule 40 Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools, outdoor applications and cold water supply lines. ASTM D 1784 ASTM D 1785 ASTM D 2665 FHA UM 79a FEDERAL SPECIFICATION L-P-320a\nNSF STANDARD 14 AND 68 All supply and drainage fittings will be compression type (1/4 PE) tube and their associated fittings. Water level can be controlled by adjusting the height inside each tube. Credit Greenerways |
3 INCH PIPE 3x5x8 HYDRO A-FRAME GARDEN 196 PLANTSTRUCK SHIP BY BUYER 198 Pounds Each = $200 to $250 Shipping
Lumber non-combustible building material for weather protected applications. Each piece stamped Underwriters Laboratories, Inc. stamp indicating that the product has code recognized classifications for surface burning characteristics 3" Diameter PVC Schedule 40 Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools, outdoor applications and cold water supply lines. ASTM D 1784 ASTM D 1785 ASTM D 2665 FHA UM 79a FEDERAL SPECIFICATION L-P-320a\nNSF STANDARD 14 AND 68 All supply and drainage fittings will be compression type (1/4 PE) tube and their associated fittings. Water level can be controlled by adjusting the height inside each tube. Credit Greenerways |
TRUCK SHIP BY BUYER 240 Pounds Each = $240 to $290 Shipping
Lumber non-combustible building material for weather protected applications. Each piece stamped Underwriters Laboratories, Inc. stamp indicating that the product has code recognized classifications for surface burning characteristics 3" Diameter PVC Schedule 40 Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools, outdoor applications and cold water supply lines. ASTM D 1784 ASTM D 1785 ASTM D 2665 FHA UM 79a FEDERAL SPECIFICATION L-P-320a\nNSF STANDARD 14 AND 68 All supply and drainage fittings will be compression type (1/4 PE) tube and their associated fittings. Water level can be controlled by adjusting the height inside each tube. Credit Greenerways |
